Sony RM-AV2500T - Changing the Interval between Operation Steps

29
GB
Changing the interval
between operation steps
You can control the interval from 100 –
900 ms in units of 100 ms steps.
1 While pressing COMMANDER
OFF, press PROGRAM + and
PROGRAM –.
Learnable SYSTEM CONTROL keys
and number keys flash in the display
panel.
TV
CD MD
SAT VCR
TAPE
DVD
M1
CBL
M2
AMP
M3
PROGRAM
3
2
4
1
PROGRAM PROGRAM
To clear a System Control
function programmed for a
Components Select button
1 While pressing COMMANDER
OFF, press w + and VCR.
2 While pressing the LIGHT button,
press VCR.
The programme for the selected
button is erased.
When you want to set a new
programme to this Component Select
button, follow Steps 1 to 2 on page 28.
Continued