35
GB
Example: To store the On/Off
signal of an air-conditioner to
the SYSTEM CONTROL B button
1 Place the Commander head to
head with the remote control of
the air-conditioner.
2 While pressing COMMANDER
OFF, press PROGRAM + and
w +.
Learnable SYSTEM CONTROL keys
and number keys flash in the display
panel.
If a signal has been learned on that
button, the display stays lit. If you
want to programme on that button,
clear the signal first (page 36).
RM-AV2500T
Remote control of
your air-conditioner
about 2 – 4 inches
(5 – 10 cm) away
PROGRAM
TV
CD MD
SAT VCR
TAPE
DVD
M1
CBL
M2
AMP
M3
PROGRAM
3
5
2
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons
In addition to their original System
Control functions (page 22), SYSTEM
CONTROL 1 – 9, A, B or C buttons can be
programmed to “learn” any remote
control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1 – 9,
A, B or C buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
Continued
To Next Page
Loading...
