69
To clear timer settings
programmed for a specific PROG
(1-12) Label key
1 While pressing COMMANDER
OFF, press %.
2 Press the Mode Display key (SET)
once to display “RESET” on one
of the Label keys on the display.
3 Press the RESET key.
“RESET” appears on the Mode
Display key.
4 Press the TIMER button.
Continued
“PROG1” - “PROG4” are displayed.
To change the Label keys, press the
TIMER button.
5 Press the Label key of which
timer settings you want to erase.
The selected programme number is
displayed on the left Label key.
6 Press the YES key.
During erasing, “c
c” stays lit. When
erasing finishes, “OK” is displayed
with a beep sound.
If you press the NO key
The display returns to Step 4.
7 Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previously set mode.
COMMANDER
OFF
To Next Page
Loading...
