70
COMMANDER
OFF
To clear all timer settings
programmed for all PROG (1 - 12)
Label keys
1 Proceed Steps 1 - 3 on page 69.
2 While pressing the DEL key, press
the TIMER key.
3 Press the YES key.
“REALLY?” stays lit, and “YES” and
“NO” flash.
If you press the NO key
The display returns to Step 1.
4 Press the YES key.
If you press the NO key
The display returns to Step 1.
During erasing, “c
c
c
c” stays lit.
When all timer settings programmed
for all PROG (1 - 12) Label keys are
erased, “OK” is displayed with a beep
sound.
5 Press COMMANDER OFF.
If you hold COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you hold COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
Setting the Timer (continued)
To Next Page
Loading...
