Sony RMT-B119A - Board and WLAN Module; Switching Regulator; Board

2-5. FR-318 BOARD AND WLAN MODULE
2-3
2-6. SWITCHING REGULATOR
Switching regulator
BDP-BX39/S390
PS insulator
1
2
One screws+BV3(3-CR)
6
7
5
One screws+BV3(3-CR)
Earth Plate
3
4
Flexible flat
cable (FIM-036)
(CN701)
WLAN Module
Harness USB-023
(CNxxx)
FR-318 Board
Harness PM-173
(CN201)
2
4
3
Two screws +BV3(3-CR)
1
Release PS insulator clip
5
(tightening torque = 5 to 6 kgf•cm)
(tightening torque = 5 to 6 kgf•cm)
(tightening torque = 5 to 6 kgf•cm)
*Caution
Whenever you need to assemble FR-318
Board please make sure FIM-036 is
on top of PF insullator.
*Caution
Whenever you need to assemble WLAN
module please make sure harness
USB-023 and PM-173 is at the right place.
USB-023
PM-173
PM-173