Sony SA-G700 - Changing the Brightness of the Front Panel Display and Indicators (DIMMER); Saving Power in Standby Mode

38
GB
Changing the Brightness
of the Front Panel
Display and Indicators
(DIMMER)
You can change the brightness of the
following.
• Front panel display
• BLUETOOTH indicator
• Power indicator on the subwoofer
1 Press DIMMER repeatedly to
select the desired setting.
The front panel display is turned off when
[OFF] is selected. It turns on automatically
when you press any button, then turns off
again if you do not operate the system for
about 10 seconds. However, in some cases,
the front panel display may not turn off. In
this case, the brightness of the front panel
display is same as [DARK].
Saving Power in Standby
Mode
Check that you have made the following
settings:
– [HDMI] - [STANDBY THROUGH] is set to
[OFF] (page 36). (The default setting is
[AUTO].)
– [BT] - [STANDBY] is set to [OFF]
(page 37). (The default setting is [ON].)
Front panel
display
Function
[BRIGHT]
The front panel display
and indicators light
brightly.
[DARK] The front panel display
and indicators light
darkly.
[OFF] The front panel display
is turned off.
Note
DIMMER