Rear Panel Parts Descriptions
q
ANALOG 2CH OUT L/R jacks (5)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
q
ANALOG 5.1CH OUT jacks (4)
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
q
DIGITAL (CD) OUT COAXIAL connector (6)
Connect to an audio component using an coaxial
digital cable.
q
DIGITAL (CD) OUT OPTICAL connector (6)
Connect to an audio component using an optical
digital cable.
q
CONTROL Al II jacks (6,26)
Connect to a Sony audio component using the
monaural (2P) mini-plug cord.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in
q
. Those of the Super
Audio CD cannot be
output through
DIGITAL (CD) OUT.
To Next Page
Loading...
