If you cannot connect the speaker, try the following.
Move the device over the N-mark part of the speaker slowly.
If the device is in a case, remove the case.
If you touch a device on the speaker, the device terminates the BLUETOOTH connection with the current device (NFC-
compatible headset, etc.), and connects with the speaker.
Note
When an audio cable is connected to the speaker’s AUDIO IN jack while the speaker and the BLUETOOTH device have been
connected via BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the
hands-free function is available). To listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker’s
AUDIO IN jack.
If your device is a type that goes into standby mode in response to magnetic force, it may not be able to be connected by NFC.
When using the Speaker Add function or Wireless Party Chain function, touch the speaker where the
(BLUETOOTH)
indicator flashes. The device cannot make a BLUETOOTH connection with the speaker where the
(BLUETOOTH) indicator
turns off.
Related Topic
Listening to music of a device via BLUETOOTH connection
4-735-513-11(3) Copyright 2018 Sony Corporation
To Next Page
Loading...
