Help Guide
Wireless Speaker
SRS-XB21
Using the voice assist function (Siri)
By using the Siri function that comes with the iPhone/iPod touch, you can speak to the speaker’s microphone to operate
the iPhone/iPod touch.
The following shows how to use Siri.
Note
Siri cannot be activated when you say “Hey Siri” through the speaker’s microphone even when the iPhone/iPod touch’s [Allow
“Hey Siri”] setting is on.
4-735-513-11(3) Copyright 2018 Sony Corporation
Turn on Siri.
On iPhone/iPod touch, select [Settings] – [Siri] to turn on Siri.
The operation above is an example. For details, refer to the operating instructions supplied with the iPhone/iPod
touch.
For details on Siri, refer to the operating instructions or support website of the iPhone/iPod touch.
1
Connect the speaker to the iPhone/iPod touch via BLUETOOTH connection.
2
While the speaker is connected with the iPhone/iPod touch via BLUETOOTH connection and the
iPhone/iPod touch is in standby or playing music, press and hold the
(play) button/ (call) button
for about 3 seconds.
The Siri is activated and you will hear the start-up sound.
3
Make a request to Siri through the speaker’s microphone.
For details on Siri, such as apps which work with Siri, refer to the operating instructions supplied with the
iPhone/iPod touch.
4
To Next Page
Loading...
