Note
Noise or sound interruption may occur in the [AUTO] (Priority on sound quality) mode, depending on the setting of your
BLUETOOTH device and ambient conditions. In this case, change the speaker to the [SBC] (Priority on stable connection) mode.
Related Topic
Using the BLUETOOTH standby function
What you can do with “Sony | Music Center”
4-735-513-11(3) Copyright 2018 Sony Corporation
Tap [Settings] – [Other Settings] – [Bluetooth Codec], and then select a codec.
[AUTO]: Priority on sound quality
[SBC]: Priority on stable connection
3.
To Next Page
Loading...
