Sony STR-D1090 - Remote Commander Identification; RM-P321 Program Control Functions; Receiver Control Buttons; Other Equipment Control Buttons

aac latcm(elsvalititerstaceye|
iaiette) Com@xeyeniitctele (=) aa
Program control section (RM-P321 only)
Mode selector and indicator
SONY STD: To contro! Sony equipment.
USER STD: To control equipment whose remote control
functions are stored.
LEARN: To store functions of other remote commanders
emitting infrared rays.
PROGRAM CLEAR: Clears the stored functions.
Receiver control section
FUNCTION:
DAT, CD, TUNER, PHONO, VIDEO 1, VIDEO 2, VIDEO
3, TAPE, DIGITAL 1, 2: The each function is selected
and the each unit enters its operating mode
automatically. (DIGITAL 1 and 2 do not function.)
SYSTEM OFF: Turns off the power of the whole system.
POWER: Turns on the power of the receiver.
14
SOUND FIELD buttons
U/P (user/preset): Selects the USER or PRESET mode.
MODE: Selects the sound field mode.
ON/OFF: Turns on/off the sound field system.
BAND: Selects the frequency band of the equalizer.
EQ: Turns on/off the setting of TONE controls.
T, (test) TONE: Generates a pink noise signal that is
sent in succession to each speaker.
CURSOR MODE: Select CURSOR MODE.
CURSOR operating buttons
REAR LEVEL +/— buttons: Control the volume of rear
speakers (surround level).
CENTER LEVEL +/— buttons : Control the volume of
center speaker (surround level).
DBFB button: Turns on/off the DBFB (Dynamic Bass
Feedback).
MUTING button: Mutes the sound.
MASTER VOL +/~ buttons: Control the receiver
volume.
SLEEP: Set to the SLEEP timer mode. in this mode, the
unit is automatically turned off after the designated
time.
ON SCREEN ON/OFF button: Turn on/off the ON
SCREEN mode. (RM-P321 only)
Other equipment control section
Numeric buttons (1 to 0): Designate the number.
ENTER: Press after designating the TV/VCR channel.
SHIFT: Select the memory page (A, B or C).
TVNIDEO selector: Selects the program to see : TV or
VIDEO.
ANT TV/VTR button: Selects the output signal from the
antenna terminal on the VCR, either a TV signal or
VCR programs.
CH/PRESET +/- buttons: Select a preset channel.
INDEX: Set to the index tuning mode.
<¢</> >: Fast winding/manual search
@: Recording
</>: Play
@: Stop
il: Pause
</>; Locates a desired selection.
REV/FWD: Press @ and REV or FWD at the same time.
D (disc) SKIP: Disc skip (for a CD player equipped
with a multi-disc changer)
SELECT: Changes the settings of the FUNCTION
buttons.
Note
The button which has no name does not function.
[4] SYSTEM/TV mode switch
In TV mode (When setting the SYSTEM/TV selector
to TV)
Only MUTING, MASTER VOL +/~ and the operative
buttons in TV section on the list described on the next
page can be used.
[5] RESET button
Resets the remote commander to the initial state.