Sony STR-DA1200ES - Page 11

11
STR-DA1200ES
Yo u can use the supplied remote RM-AAP015
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate.
RM-AAP015
Remote commander
Name Function
A AV ?/1
(on/standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
B ?/1
(on/standby)
Press to turn the receiver on or
off.
C Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
in “Programming the remote”.
E NIGHT
MODE
Press to activate the NIGHT
MODE function.
F INPUT
MODE
Press to select the input mode
when the same components are
connected to both digital and
analog jacks.
G 2CH Press to select a sound field.
A.F.D.
MOVIE
MUSIC
H Numeric
buttons
Press to
− preset/tune to preset stations.
− select track numbers of the
CD player, DVD player or
MD deck. Press 0/10 to
select track number 10.
− select channel numbers of
the VCR or satellite tuner.
− After pressing TV (wj),
press the numeric buttons to
select the TV channels.
I ENTER Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
MEMORY Press to store a tuner station
during tuner operation.
J DISPLAY Press to select information
displayed on the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, or MD deck.
K After pressing MENU (qd) or
TOP MENU (qk), press V/v, B
or b to select the settings. Then
press to enter the selection.
L TOOLS Press to display and select items
from the option menus for DVD
player, etc.
OPTIONS
M MENU Press to display the menu of the
receiver, a DVD player or TV,
etc.
N REPLAY B
·
/
ADVANCE
·
b
Press to replay the previous
scene or fast forward the current
scene of the VCR or DVD
player.
O m/M
a)
x
a)
X
a)
H
b)
./>
a)
Press to operate the DVD
player, CD player, MD deck or
tape deck, etc.
TUNING +/– Press to select stations.
P PRESET
+
b)
/–
Press to register FM/AM Radio
stations or to select preset
stations.
TV CH +/– Press TV (wj) and then press
TV CH+/– to operate the TV,
satellite tuner, VCR, etc.
Name FunctionName Function
V/v/B/b
Q F1/F2 Press TV (wj) and then press
F1 or F2 to select a component
to operate.
• Hard disk recorder
F1: HDD
F2: DVD
• DVD/VHS combo player
F1: DVD
F2: VHS
TV/VIDEO Press TV/VIDEO and TV (wj)
at the same time to select the
input signal (TV input or video
input).
WIDE Press to select the wide picture
mode.
R TOP MENU Press to display the menu or
on-screen guide of the DVD
player on the TV screen. Then
use V/v/B/b and to perform
menu operations.
MENU Press to display the menus of
the DVD player on the TV
screen. Then use V/v/B/b and
to perform menu operations.
S MUTING Press to activate the muting
function.
T MASTER
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
TV VOL +/– Press TV (wj) and then press
TV VOL +/− to adjust the
volume level of the TV.
U DISC SKIP Press to skip a disc when using
a multi-disc changer.
V RETURN/
EXIT O
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
W ON SCREEN Press to display the receiver
status. Then, if you press
MENU (qd), the menus of the
receiver appear.
D RECEIVER Press to enable the receiver
operation.
a)
See the table on page 93 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
•Some functions explained in this section may not
work depending on the model.
•The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
X CLEAR Press to
− clear a mistake when you
press the incorrect numeric
button.
− return to continuous
playback, etc. of the satellite
tuner or DVD player.
>10 Press to select
− track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
− channel numbers of the
Digital CATV terminal.
D.TUNING Press to enter direct tuning
mode.
Y A.DIRECT Press to switch the audio of the
selected input to analog signal
without any adjustment.
Z SLEEP Press to activate the Sleep
Timer function and the duration
which the receiver turns off
automatically.
wj TV Press to enable TV operation.
wk RM SET UP Press to set up the remote.