Sony STR-DA6400ES - Page 24

24
GB
9 Press V/v/B/b and to select a
character one by one to enter the IP
address.
10Press V/v/B/b to select “Finish,” then
press .
11Press b to display the next screen.
12Repeat the process in steps 8 to 11
again to enter the Subnet mask,
Gateway address, Primary DNS
address, and Secondary DNS address.
13Press V/v to select “Test Connection,”
then press .
“Success! Your device is now connected to
your network.” appears on the TV screen.
14Press to select “Finish.”
To set the Proxy server
manually
1
Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or b.
4 Press V/v repeatedly to select
“Network,” then press or b.
5 Press V/v repeatedly to select
“Network Setup” then press .
6 Press V/v repeatedly to select “Proxy
setup,” then press .
7 Press V/v repeatedly to select
“Enable,” then press .
8 Press .
The soft keyboard appears on the TV
screen.
9 Press V/v/B/b and to select a
character one by one to enter the proxy
server address.
10Press V/v/B/b repeatedly to select
“Finish,” then press .
11Press b to select the port number box,
then press .
The soft keyboard appears on the TV
screen.
12Press V/v/B/b and to select a
character one by one to enter the port
number.
13Press V/v/B/b repeatedly to select
“Finish,” then press .
14Press b.
15Press V/v repeatedly to select “Finish,”
then press .