Sony STR-DA6400ES - Changing the Settings of the Home Network Function of the Receiver

25
GB
Using Other Functions
Changing the settings of
the home network
function of the receiver
You can set up the receiver to be used as a
server.
1 Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or
b.
4 Press V/v repeatedly to select
“Network,” then press or b.
5 Press V/v repeatedly to select
“Server Function Setup,” then
press .
6 Press V/v repeatedly to select
“ON” or “OFF,” then press .
A confirmation screen appears on the TV
screen
7 Press to select “Finish.”
Turning the server function on/
off
AMP
V/v/b,
MENU