Sony STR-DA6400ES - Updating the Firmware

26
GB
Updating the firmware
You can check the version of the firmware on
the system of the receiver, and you can also
update the firmware of the receiver.
1 Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or
b.
4 Press V/v repeatedly to select
“System,” then press or b.
5 Press V/v repeatedly to select
“System Update,” then press
.
6 Press V/v repeatedly to select
“Internet Update,” then press
.
The system information of the receiver
appears on the TV screen.
7 Press B/b to select “Cancel,”
then press .
1 Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or
b.
4 Press V/v repeatedly to select
“System,” then press or b.
5 Press V/v repeatedly to select
“System Update,” then press
.
6 Press V/v repeatedly to select
“Internet Update,” then press
.
The current system version and latest
system version are displayed on the TV
screen.
7 Press to select “Update.”
A confirmation screen appears on the TV
screen.
Checking the system
information
AMP
V/v/b,
MENU
Updating the receiver using the
menu