Sony STR-DB1080 User Manual

Additional Information
69
GB
Reference Power Output
2)
(8 ohms 1 kHz, THD 0.7 %)
FRONT
1)
: 100 W + 100 W
CENTER
1)
: 100 W
SURR
1)
: 100 W + 100 W
SURR BACK
1)
: 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT
1)
: 90 W + 90 W
CENTER
1)
: 90 W
SURR
1)
: 90 W + 90 W
SURR BACK
1)
: 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
: 90 W + 90 W
CENTER
1)
: 90 W
SURR
1)
: 90 W + 90 W
SURR BACK
1)
: 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
: 80 W + 80 W
CENTER
1)
: 80 W
SURR
1)
: 80 W + 80 W
SURR BACK
1)
: 80 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code Power requirements
E 240 V AC, 50 Hz
SP, CEL, CEK, KR 230 V AC, 50 Hz
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
80 W + 80 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
:100 W + 100 W
CENTER
1)
: 100 W
SURR
1)
: 100 W + 100 W
SURR BACK
1)
: 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT:
1)
80 W + 80 W
CENTER
1)
: 80 W
SURR
1)
: 80 W + 80 W
SURR BACK
1)
: 80 W
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
2)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W
2)
continued

Sony STR-DB1080 Specifications

General

Brand	Sony
Model	STR-DB1080
Category	Stereo Receiver
Language	English