Need help?Do you have a question about the Sony STR-DB925 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Number of Channels | 2 |
| Total Harmonic Distortion (THD) | 0.09% |
| Input Sensitivity (MM) | 2.5 mV |
| Signal-to-Noise Ratio | 100 dB |
| Signal to Noise Ratio (line) | 100 dB |
| Digital inputs | coaxial, optical |
| Power Output | 100 W per channel |
| Output Power | 100 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.09%) |
| Frequency Response | 10Hz to 50kHz |
| THD | 0.09% |
| Speaker load impedance | 8 Ω |
| Video Connections | Composite video |
Details power output for stereo and surround modes, including impedance and frequency response.
Lists sensitivity and impedance for various analog audio inputs like PHONO, CD, TAPE, MD/DAT.
Specifies output voltage and impedance for TAPE/MD/DAT REC OUT, VIDEO OUT, and WOOFER.
Procedure to set the unit to its original shipment settings.
Erases all preset settings, used when returning the unit to the customer.
Notes on potential issues when the front panel is removed, affecting volume control and display.
Table detailing how input signals are assigned to output channels during DSP test mode.
Lists potential error messages during self-diagnosis and their causes/countermeasures.
Identifies and explains the function of each control and indicator on the front panel.
A diagram showing the numbered parts and controls on the front panel.
Illustrates the physical placement of various circuit boards within the unit.
Shows the functional blocks and signal flow for the input processing section.
Detailed circuit diagram for the power amplifier stages of the receiver.
Layout of components and traces on the display circuit board.
Exploded view of the unit's exterior casing and rear panel components.
Exploded view detailing the assembly of the front panel and its controls.
Exploded view showing the internal chassis, boards, and major components.
List of all capacitors used, including part number, type, and value.
List of all resistors used, including part number, type, and value.
List of all transistors used, including part number and type.
List of all integrated circuits used, including part number and function.
To Next Page
