Need help?Do you have a question about the Sony STR-DE525 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.09% |
| Frequency Response | 10Hz to 50kHz |
| Input Impedance | 47 kΩ |
| Speaker Load Impedance | 8 ohms |
| Digital Inputs | Coaxial, Optical |
| Video Connections | Composite |
| Tuning range | FM/AM |
| Dimensions | 430 x 157 x 350 mm (W x H x D) |
| Power Output | 100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD) |
Covers fire, shock, moisture hazards, CATV installation, owner's record, and customer notes.
Details safety measures for power sources, placement, operation, and cleaning.
Guide to unpacking the receiver, inserting batteries, and initial setup steps.
Instructions for connecting FM and AM antennas for optimal signal reception.
How to connect audio sources like CD players, turntables, and tape decks.
Steps to connect video sources like TV tuners, VCRs, and game consoles.
Connecting multi-channel audio sources for immersive surround sound.
Covers connections like Control S, Control A1, and AC power cord.
Introduction to speaker setup and description of relevant front panel controls.
Details on connecting speaker terminals, required cords, and important notes.
Setting up Dolby Pro Logic, center modes, impedance, and speaker placement.
Identifies and explains the function of buttons and controls on the receiver's front panel.
Details operation of essential controls like volume, muting, speaker selectors, and headphone jack.
Explains display indicators, tone adjustments, and basic tuner functions.
How to choose pre-programmed sound fields for movies and music.
Adjusting delay, effect level, speaker volume, and tone for personalized sound.
Introduces Direct, Automatic, and Preset tuning for FM/AM radio.
Step-by-step guide to tuning specific radio frequencies using numeric buttons.
How to scan for stations automatically and preset favorite stations.
Naming preset stations/sources and recording audio/video between components.
Setting the receiver to automatically turn off at a specified time.
Adjusting display brightness and rear speaker gain using the SET UP button.
Solutions for common problems like no sound, unbalanced audio, or connection errors.
Addresses noise, recording failures, radio tuning, and surround effect problems.
Lists detailed technical specifications for audio, amplifier, tuner, and video sections.
Defines key audio terms and technologies like surround sound and Dolby formats.
Summarizes parameter adjustments for CURSOR MODE and SET UP buttons.
To Next Page
