Sony STR-DH790 - Page 45

45
GB
Menu/Other Functions
 : Not used.
: Used.
* When you connect height speakers, set the speaker pattern to a “x.x.2” setting. Then, select the speaker
type (page 45).
When you connect a subwoofer, set the speaker pattern to a “x.1” setting.
Speaker type for height speakers (“HEIGHT”)
This setting only available when you set the speaker pattern to a setting (“x.x.2”) that has
height speakers (page 44).
 : This setting is not available.
: This setting is available.
“3.1”      
“3.0” 
“2.1.2” 
“2.0.2” 
“2.1” 
“2.0” 
Tip
Speaker
pattern
Surround Dolby
Atmos enabled
speakers (“SRD”)
Front Dolby Atmos
enabled speakers
(“FD”)
Top middle speakers
(“TM”)
Front high speakers
(“FH”)
“5.1.2” 
“5.0.2” 
“4.1.2” 
“4.0.2” 
“3.1.2” 
“3.0.2” 
“2.1.2” 
“2.0.2” 
Speaker
pattern
Front
left/right
speaker
Center
speaker
Surround
left/right
speaker
Surround
back left
speaker
Surround
back right
speaker
Subwoofer
Height
speakers*