Connecting 5.1-channel speaker system with Zone 2 connection [23]
Connecting 5.1-channel speaker system with bi-amplifier connection [24]
Connecting 5.1-channel speaker system with front B speaker connection [25]
Connecting 2.1-channel speaker system to enjoy the Front Surround mode [26]
3. Connecting a TV
Connecting a TV [27]
Connecting a 4K TV [28]
About input/output of video signals [29]
Notes on connecting cables [30]
About HDMI connections [31]
4. Connecting audio-visual devices and the antennas (aerials)
Connecting devices with HDMI jacks [32]
Connecting devices with jacks other than HDMI jacks [33]
About input/output of video signals [34]
Connecting a USB device [35]
Connecting the antenna (aerial) [36]
Connecting another amplifier in Zone 2 [37]
Connecting another amplifier or TV in the HDMI zone [38]
Digital audio formats supported by the receiver [39]
Notes on connecting cables [40]
About HDMI connections [41]
5. Connecting to the network
Connecting the receiver to the network using a LAN cable (for wired LAN
connections only) [42]
Connecting the receiver to the network using the wireless LAN antenna (for
wireless LAN connections only) [43]
6. Turning on the receiver/preparing the remote control
Inserting batteries into the remote control [44]
Turning on the receiver [45]
7. Setting up the receiver using Easy Setup
Setting up the receiver using Easy Setup [46]
Performing Auto Calibration
1. About Auto Calibration [47]
To Next Page
Loading...
