Sony SVP-9020 - Page 36

Chapter 4 VUALAUTLIUUUUI
4-8(E)
Repeated Playback of a Desired Portion _
You can repeatedly play back a desired portion using the MARK IN A and B
buttons and the PROGRAMMED OPERATION selector.
Three types of repeat playback are supported:
® Repeat playback of a desired portion
® Repeat playback between the beginning of the tape and a particular point
® Repeat playback between a particular point and the tape end
Repeat playback of a desired portion
Chapter 4 Playback
°
CAST IC) | coh
Repeat playback of a desired portion
1 Set the PROGRAMMED OPERATION selector to OFF.
2 Press the RESET button.
The memorized points are erased.
3 Press the PLAY button.
The player starts playing back.
To repeat the portion between the beginning of the tape and a particular point, go to
step 7.
4 Press the PAUSE button at the point where you want playback to start. To
locate the desired point precisely, use the shuttle dial.
For details, see “ Locating a desired point” on page 4-11(E).
5 Press the MARK IN A button.
The player memorizes the repeat start point (point A).