Sony SVP-9020 - Timer Playback

~ chapter + {THVT
1-14(E)
Using an optional timer, you can automatically start playback at a preset time.
Timer playback
Chapter 4 Playback
|
BE At
08 Oo SEC) ay O
7c
AC power cord
(supplied)
To AC outlet
Timer playback
1 Set the POWER switch of the player to ON.
2 Set the playback start and stop times with the timer.
For details, refer to the operation manual provided with the timer.
3 Set the TIMER switch to PLAY.
The timer automatically turns on the player power at the playback start time.
To stop playback during timer playback
Press the STOP button of the player.
| Notes |
© The player automatically rewinds the tape then stops. If, however, you set repeat
playback between a particular point and the tape end, the player automatically
rewinds the tape, enters repeat playback mode and starts playback repeatedly
upon reaching the tape end.
© When the playback stop time is reached, the timer turns off the player power with
the tape wound around the head drum. At the next playback start time, the timer
again automatically turns on the player power. The tape stops momentarily, then
timer playback starts.