Sony TA-A1ES - Page 13

13
GB
If you connect the amplifier to a Sony product with an IR repeater output
jack, you can operate the amplifier from the product connected. For details,
refer to the operating instructions of the product.
Equipment with XLR
(balanced) connectors (Sony
Hard Disk Audio Player, etc.)
IR repeater (not supplied)
Analog audio output jacks of Super Audio CD player, CD player, Network player, etc.
• This amplifier does not support phono inputs.
• It is not necessary to connect all the cables.
• Connect cables according to the jacks of your equipment.
Tip