Need help?Do you have a question about the Sony TA-F501ES and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 80W per channel into 8Ω |
| Total Harmonic Distortion (THD) | 0.008% |
| Total harmonic distortion | 0.008% |
| Damping factor | 100 |
| Frequency Response | 10 Hz - 100 kHz |
| Inputs | 1 x Phono |
| Outputs | tape1, tape2 |
| Input sensitivity | 2.5mV (Phono) |
| Signal to noise ratio | 100 dB |
| Output | Speaker Terminals |
| Speaker load impedance | 4Ω - 16Ω |
Essential safety guidelines to prevent fire, electric shock, and damage to the unit.
How to connect speaker cables to the amplifier's terminals, ensuring correct polarity.
How to use the AUTO CALIBRATION function to measure and set speaker parameters automatically.
Step-by-step guide on how to perform the auto calibration measurement process.
Explains error and warning codes encountered during auto calibration and how to resolve them.
Guide to navigating the System Settings menu for customizing amplifier parameters.
Common audio problems like no sound, unbalanced sound, hum, or noise with troubleshooting steps.
Explanation of error codes displayed on the unit and their corresponding causes and remedies.
To Next Page
