Sony TC-K890ES - Specifications

Specifications
Recording system 4-track 2-channel stereo
Fast winding time Approx. 90 sec. (with Sony C-60
cassette)
Bias AC bias
Heads Erasing head x 1 (S&F head)
Recording head x 1 (LA head)
Playback head x 1 (LA head)
Motors Capstan motor x 1
(direct-drive linear torque BSL motor)
Reel motor x 1 (DC motor)
Wow and fiutter +0.04% W.Peak (IEC)
0.024% WRMS (NAB)
+0.065% W.Peak (DIN)
Signal-to-noise ratio (at peak level)
Type IV Type Il Type |
(Sony Metal- | (Sony UX-S) | (Sony HF-S)
Select)
Measured at peak level weighted without NR. The S/N is
improved by about 15 dB at 500Hz and by about 20 dB
about 1 kHz with Dolby-C NR on, and by 5 dB at 1kHz and
by 10 dB about 5 kHz with Dolby-B NR on.
Harmonic distortion
0.4% (with Sony Type I, 160nWb/m,
315Hz, 3rd H.D.)
1.38% (with Sony Type IV, 250nWb/m,
315Hz, 3rd H.D.)
Frequency response (Dolby NR OFF)
Type
IV
cassette
|
20
-
22,000
Hz
(#3
dB,
IEC)
(Sony
Metal-Select)
SCO,
Hz
[+3
dB,
{-4dB
Type
Il
cassette
:
(Sony UX-S)
20
-
20,000
Hz
(+3
dB,
IEC)
Type | cassette
(Sony
HF-S)
20
-
17,000
Hz
(+3
dB,
IEC)
Inputs
Line inputs 0.16 V
Input impedance | 47 kilohms
(phono jacks)
CD DIRECT INPUT |Input impedance {47 kilohms
(phono jacks)
Outputs
Rated output /0.5 V at a load
level impedance of
47 ae
Line outputs
(phono jacks)
oxdsance {Over 10kKilohms |
Headphones Output level |0—3 mW ata load
(stereo phone jack) impedance of
32 ohms
18
General
Power requirements 120 V AC, 60 Hz
Power consumption 23W
Dimensions Approx. 470 x 135 x 350 mm (w/h/d)
(18% x 5% x 13% inches)
including projecting parts and controls
Weight Approx. 8.1 kg (17 Ibs 14 02)
Supplied accessories
’ Audio connecting cords (2)
Screws (4)
Design and specifications are subject to change without
notice.