Sony TC-WAS8ESA - Page 10

10
Advanced
Playback
Operations
Adding tracks to the end of a program
Press @ (CLEAR) once, and follow Steps 2 to 5 in
“Creating
Your
Own
Program
(RMS
Play)”
on
page
9.
"© To create another program
Press ™@ (CLEAR) until the order on the program
returns
to
0
and
the
cursor
flashes
above
track
number
1
in the display, then follow Steps 2 to 5 on page 9.
.°Z You can use your Sony remote to perform RMS
programming
If
your
Sony
stereo
receiver’s
remote
has
RMS
buttons,
do the following steps.
1 Turn on the receiver and press TAPE.
2 Press RMS/START.
3 Press B> or ~#@ to select the front or reverse side of
the tape, and the number keys and the >10 key to
specify the tracks.
4 Press RMS/START again to start RMS Play.
Note
For
more
information
on
the
availability
of
Sony
stereo
receiver
remotes
with
RMS
capability,
contact
your
nearest
Sony
dealer.