Sony TC-WAS8ESA - Recording Your Own Program (RMS Dubbing)

Advanced Recording Operations
SI A rp
Recording the Same Source on
Both Decks (Simultaneous
Recording)
(TC-WAS8ESA/WE805S only)
You can record the same source on cassettes in deck A
and B at the same time.
DIRECTION MODE
<J/f> A+B REC
PAUSE II
1° Insert blank cassettes into both decks.
Make sure that record-protect tabs on the
cassettes have not been removed.
Select the Dolby NR system (see page 7).
3 Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
—_—
Only one side =
Both sides cD
4 Press A+B REC.
Both decks change to recording pause.
3 Start playing the program source.
6 Adjust the recording level manually, if necessary
(see page 7).
7 Select the side you want to start recording from
on both decks.
ene n
To record from Press
The front side ae
The reverse side <a
8 Press PAUSE Il on deck B.
Simultaneous Recording starts.
To stop Simultaneous Recording
Press Ml on both decks.
v PAUSE lf and REC MUTE © (see page 16) on deck B
can contro! both decks at the same time
During Simultaneous Recording, PAUSE El and REC
MUTE © on deck B control both decks, but not PAUSE
8 and REC MUTE O on deck A.
fg Pe ee eS St
Recording Your Own Program
(RMS Dubbing)
You can record an RMS program that you've created
(see “Creating Your Own Program (RMS Play)” on
page 9). This function works only at normal speed.
RMS / START <1 / > HIGH / NORMAL
[ icsate:
PAUSE 81
1 Insert the recorded cassette into deck A and a
blank cassette into deck B.
Make sure the record-protect tabs on the cassette
in deck B have not been removed.
2 Program tracks on deck A (see Steps 1 to 5 on
page 9).
3 Press HIGH/ NORMAL once to change the tape
deck to dubbing standby.
4 Select the side of the tape in deck B you want to
record on.
To start recording Press
On the front side >
On the reverse side <j
5 Press RMS/START or PAUSE Wf on deck B to
start RMS Dubbing.
To stop RMS Dubbing
Press Ml on deck B. The RMS program remains even after
RMS Dubbing stops.
"@ To insert a blank space on the tape before you start
RMS Dubbing
You can insert a blank space of 4 seconds or more on
the tape in deck B by pressing REC MUTE O after Step
4.
For details, see “Inserting a Blank Space During
Recording (Record Muting)” on page 16.
"© A blank of 10 seconds is automatically inserted on
the tape when you start RMS Dubbing if:
— vou insert a new cassette into deck B.
— the tape in deck B is completely rewound to its
beginning and automatically stopped.
15