Sony TC-WAS8ESA - Inserting a Blank Space During Recording (Record Muting)

16
Advanced Recording Operations
ee eee
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between each
track. The blank spaces allow you to locate the start of
specific tracks afterwards using the Multi-AMS
function (see page 8). You can also use this function to
erase unwanted portions on a tape.
PAUSE Il
REC MUTE O
1 Start recording.
2 Press REC MUTE O where you want to insert a
blank space.
“REC” flashes in the display and a blank is
recorded on the tape.
After 4 seconds, §—l lights up and the tape deck
changes to recording pause.
3 Press PAUSE Ill to resume recording.
"@ If you want to insert a blank space longer than 4
seconds
Hold down REC MUTE O as long as you want. After 4
seconds, “REC” flashes faster.
When you release REC MUTE O, II lights up and the
tape deck changes to recording pause.
Press PAUSE If to resume recording.
[Be nd gp eS |
Synchro-Recording WithaCD _
Player Through a Control A1
Cable
(TC-WE805S/WE705S/WEG05S only)
By pressing SYNCHRO, you can perform synchro-
recording on your tape deck with a Sony CD player
connected to the CONTROL A1 connector through a
control Al cable (see page 4). The control Al cable
supports advanced functions not possible with the
commander-based CD synchro-recording function on
previous models. Further information on the various
operations made possible by a control A1 cable is
provided in the pamphlet attached to this manual.
DIRECTION MODE a/c
SYNCHRO
1 Set the source selector on the amplifier to CD
player.
2 Insert a CD into the CD player.
3 Select the play mode (CONTINUE, SHUFELE, or
PROGRAM) of the CD player.
4 insert a cassette into deck B.
Select the side(s) to be recorded on.
Set DIRECTION MODE to
To record'on
Only one side =
Both sides > or RELAY
6 Select the side you want to start recording from
on deck B.
To record from Press
The front side >
‘
The reverse side <—J