Advanced Playback Operations
3-862-713-31(1)/CED/SP
10
EN
Adding tracks to the end of a program
Press p (CLEAR) once, and follow Steps 2 to 5 in
“Creating Your Own Program (RMS Play)” on page 9.
z To create another program
Press p (CLEAR) until the order on the program
returns to 0 and the cursor flashes above track number 1
in the display, then follow Steps 2 to 5 on page 9.
z You can use your Sony remote to perform RMS
programming
If your Sony stereo receiver’s remote has RMS buttons,
do the following steps.
1 Turn on the receiver and press TAPE.
2 Press RMS/START.
3 Press · or ª to select the front or reverse side of
the tape, and the number keys and the >10 key to
specify the tracks.
4 Press RMS/START again to start RMS Play.
Note
For more information on the availability of Sony stereo
receiver remotes with RMS capability, contact your
nearest Sony dealer.
5/10_TC-WE825S.31(1)EN 8/19/98, 4:25 PM10
To Next Page
Loading...
