Why does my Sony Trinitron CPD-E530 hum when turned on?
If you hear a hum right after turning on your Sony Monitor, this is the sound of the auto-degauss cycle, which automatically runs for a few seconds when the power is turned on. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.
What to do if Sony Monitor buttons don't work?
If the monitor buttons on your Sony Monitor do not operate, and a message appears on the screen, check if the control lock is set to ON. If it is, set it to OFF.
Crucial safety warnings regarding fire and shock hazards, and internal component access.
Instructions for connecting the monitor to your computer via HD15 input.
Guide to navigating the on-screen menu and selecting PICTURE EFFECT modes.
Details on adjusting Moire, degauss, and other picture quality parameters.
Instructions for adjusting color temperature using EASY, PRESET, EXPERT, and sRGB modes.
Solutions for common display issues like no picture, flickering, or fuzziness.
Crucial safety warnings regarding fire and shock hazards, and internal component access.
Instructions for connecting the monitor to your computer via HD15 input.
Guide to navigating the on-screen menu and selecting PICTURE EFFECT modes.
Details on adjusting Moire, degauss, and other picture quality parameters.
Instructions for adjusting color temperature using EASY, PRESET, EXPERT, and sRGB modes.
Solutions for common display issues like no picture, flickering, or fuzziness.
To Next Page
General