Sony Trinitron KV-AR34 - Presetting Channels Manually

28
Menu Adjustment
Presetting channels manually
1
After selecting “MANUAL PROGRAM”,
select the program number to which you
want to preset a channel.
(1) Make sure “PR” is selected, then press
ENTER.
(2) Press V or v
until the program number
you want to preset (e.g., program number
“10”) appears on the menu, then press
ENTER.
2
Select the desired channel.
(1) Make sure either “VHF LOW”, “VHF
HIGH”, or “UHF” is selected, then press
ENTER.
(2) Press V or v
until the desired channel’s
broadcast appears on the TV screen,
then press ENTER.
3
If the sound of the desired channel is
abnormal, select the appropriate TV
system.
(1) Press V or v
to select “TV SYS”, then
press ENTER.
(2) Press V or v until the sound becomes
normal, then press ENTER.
MANUA L PROGRAM
PR
:
06
TV SYS
:
B/G
SENS
:
HIGH
VHF LOW
FINE
:
AUTO
MANUA L PROGRAM
PR
:
10
TV SYS
:
B/G
SENS
:
HIGH
VHF LOW
FINE
:
AUTO
MANUA L PROGRAM
PR
:
10
TV SYS
:
B/G
SENS
:
HIGH
VHF LOW
FINE
:
AUTO
MANUA L PROGRAM
PR
:
10
TV SYS
:
B/G
SENS
:
HIGH
VHF LOW
FINE
:
AUTO
MANUA L PROGRAM
PR
:
10 B/G
TV SYS
:
I
SENS
:
HIG D/K
VHF LOW M
FINE
:
AUTO
MANUAL PROGRAM
PR
:
10
TV SYS
:
I
SENS
:
HIGH
VHF LOW
FINE
:
AUTO
Tip
• You can also select the program number with the PROGR +/– or number buttons.
continued