To Next PageTo Next Page
Need help?Do you have a question about the Sony TRINITRON KV-X2583E and is the answer not in the manual?
Caution to short circuit the picture tube anode after removal to prevent shock.
Warning to use an isolating transformer to avoid shock hazard due to live chassis.
Warning to replace critical components only with specified Sony parts.
Procedures for turning the TV on, off temporarily, and off completely.
Guide to navigating and using the TV's menu system for adjustments.
Instructions for adjusting picture and sound parameters to user preference.
Troubleshooting steps for when there is no picture and no sound.
Troubleshooting steps for poor or no picture but good sound.
Troubleshooting steps for programmes that lack colour.
Troubleshooting steps for a remote commander that is not working.
Procedures for safely removing the picture tube anode cap.
Important precautions for handling the anode cap without damage.
Procedure for adjusting beam landing using pattern generator and magnets.
Adjusting horizontal and vertical static convergence using H.STAT and V.STAT.
Steps for optimizing dynamic convergence using the deflection yoke.
Procedure for adjusting white balance for accurate colour reproduction.
Procedure to enter the service mode using the remote commander.
Detailed steps for performing electrical adjustments using service menus.
Description of functions available in Test Mode 2 and how to exit.
Adjusting IF coils for B/G, D/K, I, L standards and UK models.
How to adjust AGC for clear picture without snow or cross-modulation.
List of deflection system adjustment items and their data amounts.
Explanation of how errors are triggered and identified in the BE3B chassis.
Table listing devices, LED error counts, and fatal error indicators.
Overall block diagram illustrating the TV's internal system connections.
General