Location and function of parts and controls
Front panel
[Il Tally lamp
Lights up when the video camera connected to this
monitor is selected, indicating that the picture is being
recorded.
~
POWER switch and indicator
Depress to tum the monitor on. The indicator will light
up in green.
~
REMOTE indicator
Lights up when you set USER PRESET to ON in the
menu, or when you connect a supplied cable to
REMOTE connector (No. 17 pin is ground). The controls
on the front panel do not work when this indicator lights
up.
@] VOLUME control
Turn this control clockwise or counterclockwise to
obtain the desired volume.
[fil CONTRAST control
Turn clockwise to make the contrast higher and
counterclockwise to make it lower.
[ID PHASE control
2
This control is effective only for the NTSC and NTSCw
color systems. Turn clockwise to make the skin tones
greenish and counterclockwise to make them purplish.
1
[z) CHROMA control
Turn clockwise to make the color intensity higher and
counterclockwise to make it lower.
[ID BRIGHT {brightness) control
Turn clockwise for more brightness and
counterclockwise for less.
(ID APERTURE control
Turn clockwise for more sharpness and
counterclockwise for less.
,~ma
The APERTURE, CHROMA, PHASE control settings have
no effect on the pictures of RGB signals.
[gj MENU {EXIT) button
Press to make the menu appear. Press to return to the
previous screen in the menu.
[11 ENTER {SELECT) button
Press to decide a selected item in the menu.
[gj t (+)/ .f. H buttons
Press to move the cursor(..,.) or adjust selected value in
the menu.
- 12 -
To Next Page
Loading...
