What to do if my Sony Projector says 'High temp.! Lamp off in 1 min.'?
If your Sony Projector displays 'High temp.! Lamp off in 1 min.', it means the internal temperature is too high. Turn off the power and check that nothing is blocking the ventilation holes.
How to adjust the image size on my Sony VPL-CX100 if it extends beyond the screen?
If the image extends beyond the screen on your Sony Projector, and the APA key is pressed although there are black edges around the image, display the full image on the screen and press the APA key. Also, adjust “Shift” in the Signal menu properly.
Why won't my Sony Projector power on?
If your Sony Projector isn't powering on, it could be due to a few reasons. If the power was recently turned off and on, wait about 60 seconds before trying again. Ensure the lamp cover and air filter cover are securely closed.
What does it mean when the ON/STANDBY light flashes red on my Sony VPL-CX100 Projector?
If the ON/STANDBY indicator on your Sony Projector is flashing red twice repeatedly, it indicates that the internal temperature is unusually high. Check to ensure that nothing is blocking the ventilation holes. If you are using the projector at a high altitude, make sure that “High Altitude Mode” in the Setup menu is set to “On.”
Guidelines to prevent fire, electric shock, and ensure safe operation.
Requirements for proper earthing and power cord usage.
Covers safe handling, voltage checks, and internal component safety.
Ensuring adequate ventilation to prevent heat build-up.
Instructions for cleaning the lens, cabinet, and air filter.
Conditions to avoid for optimal performance and longevity.
Warnings against toppling, tilting, blocking vents, or lens obstruction.
Details on optical system, resolution, and panel specifications for image clarity.
Versatile installation options and simplified maintenance procedures.
ID function, network expandability, Side Shot, and Network Presentation.
Identification and function of each key on the remote.
Table providing distances for various projected image sizes.
Step-by-step guide for connecting the projector to a computer.
Procedure for connecting the projector to a VCR for video output.
Step-by-step instructions for safely replacing the projector lamp.
Diagnosing and resolving issues with power and no picture display.
Addressing noisy pictures, incorrect color balance, or brightness.
To Next Page
General
