26
The Function Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: Executes APA when a computer signal is input via the RGB input terminal (INPUT A, INPUT
B).
*2: When using the Twin Picture display mode and there is no input signal, the background will be
black if you set this item to “Image” (VPL-FH36/FH35/FH31/FH30).
Setting items Description
Audio Output Vol. The higher the setting, the higher an audio level output from the audio
output terminal. The lower the setting, the lower the audio level.
Smart APA On/Off; When set to “On,” executes APA automatically when a signal is
input.
*1
CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (Captions or Text).
Off: Closed caption does not appear.
Lamp Mode High/Standard: When set to “High,” the image becomes brighter, and
power consumption becomes higher.
Lamp Timer Reset When replacing the lamps, resets the lamp timer (page 42).
Background
*2
Blue/Black/Image: Sets the background for when there is no input signal.
When set to “Image,” the Start Up Image is displayed.
Start Up Image On/Off: When set to “On,” the Start Up Image is displayed on the screen
upon startup of the projector.
Notes
To Next Page
Loading...
