What to do if my Sony VPL-FX52 Projector has no picture?
If your Sony Projector displays no picture, ensure all cables are correctly connected and the right input source is selected using the INPUT key. Also, the picture may be muting, so press the PIC MUTING key. If you're using a computer, make sure the signal is set to output only to an external monitor and, if needed, disable the DDC function in your computer settings.
How to fix a Sony VPL-FX52 Projector when the power is not turned on?
If your Sony Projector's power isn't turning on, wait about 60 seconds before trying again if you've recently turned it off and on using the I / 1 key. Ensure that the lamp cover and the air filter cover are securely closed.
How to fix a Sony Projector image that extends beyond the screen?
If the image on your Sony Projector extends beyond the screen, and there are black edges around the image, you may have pressed the APA key. Display the full image on the screen and then press the APA key. You can also adjust 'Shift' in the INPUT SETTING menu.
Why does my Sony VPL-FX52 Projector have no picture?
If your Sony Projector displays no picture, several factors could be responsible: * A disconnected or wrongly connected cable. Ensure all connections are correctly made. * An incorrect input selection. Use the INPUT key to select the correct source. * Picture muting is activated. Press the PIC MUTING key to deactivate it. * The computer signal isn't set to output to an external monitor. Configure the computer signal to output only to an external monitor. * The signal is input from the computer to the INPUT C connector. Disable the DDC function on your computer.
How to fix a Sony Projector that is not turning on?
If your Sony Projector isn't powering on, consider these potential causes: * The projector was recently turned off and on too quickly. Wait approximately 60 seconds before attempting to power it on again. * The lamp cover might be detached. Ensure the lamp cover is securely closed. * The air filter cover could be detached. Make sure the air filter cover is properly closed.
Why is the picture from INPUT C connector colored strange on my Sony VPL-FX52 Projector?
If the image from the INPUT C connector on your Sony Projector appears strangely colored, the Input-C Signal Sel. setting in the SET SETTING menu might be incorrect. Select 'Computer', 'Video GBR', or 'Component' in the SET SETTING menu, depending on the input signal you're using.
How to make the picture clearer on my Sony Projector?
If the picture on your Sony Projector is not clear, try adjusting the focus. If that doesn't work, condensation may have occurred on the lens. Leave the projector on for about two hours to resolve this.
What to do if the image extends beyond the screen on my Sony VPL-FX52?
If the image from your Sony Projector extends beyond the screen, it might be due to: * The APA key was pressed when black edges were present. Display the full image on the screen and then press the APA key. * Incorrect Shift settings. Adjust Shift in the INPUT SETTING menu properly.
Why is the picture on my Sony VPL-FX52 noisy?
The picture on your Sony Projector might appear noisy due to the combination of the number of dot inputs from the connector and the number of pixels on the LCD panel. To resolve this, try changing the desktop pattern on the connected computer.
Why does the picture flicker on my Sony Projector?
If the picture on your Sony Projector flickers, the Dot Phase in the INPUT SETTING menu may not be adjusted correctly. Adjust the Dot Phase in the INPUT SETTING menu properly.
General| Resolution | 1920 x 1200 (WUXGA) |
|---|---|
| Contrast Ratio | 2000:1 |
| Display Technology | 3LCD |
| Zoom Ratio | 1.6x |
| Input Connectors | HDMI, VGA, S-Video, Composite |
| Noise Level | 37 dB (Normal mode), 29 dB (Eco mode) |
To Next Page
