16
Projecting an Image
The cursor will disappear if the
deflection range limit is reached.
Correcting deflection 2 – top/bottom
sides of the image
1 Move s using V/v/B/b to select the
side you want to correct.
2 Press the ENTER key.
The cursor appears.
3 You can adjust the deflection of the
side, using V/v/B/b.
You can adjust the center point of
deflection using B/b. For the range of
deflection, use V/v. You can adjust the
top/bottom independently.
The cursor will disappear if the
deflection range limit is reached.
Example of cursor display:
Adjust in all directions
Upward, downward, or
rightward adjustment only
Adjust using this cursor
Example of cursor display:
Adjust in all directions
Leftward, rightward or
downward adjustment only
To Next Page
Loading...
