34
Using Network Features
Once you make the network settings, you
can open the Control window only by
performing step 3 of this procedure.
How to operate the Control window
Switching the page
Click one of the Page Switching buttons to
display the desired setting page.
Setting the access limitation
You can limit a user for accessing any
particular page.
Administrator: Allowed access to all
pages
User: Allowed access to all pages except
the Setup page
Set under [Password] of the Setup page.
When you access the Setup page for the first
time, enter “root” for user name and enter
nothing for password.
The name of the administrator is preset to
“root.”
When you change the password, input a new
password after deleting the password
(*****) that was set.
If you forget your password, consult with
qualified Sony personnel.
You can confirm the current settings for the
projector on the Information page.
Page Switching buttons
Note
Confirming the Information
regarding the Projector
Entry area for [Administrator]
Entry area for [User]
Information area
To Next Page
Loading...
