Sony VPL-PWZ10 User Manual

7
Location and Function of Controls
Overview
FREEZE key
*2
Pauses a projected image. Press
again to restore the image.
Notes
*1: Use this key when inputting a
computer signal. But it may not
be used depending on the
resolution of the input signal.
*2: Use this key when inputting a
computer signal. You cannot use
this key when “Type B USB” or
“Network” is selected as the
input.
 Setting the energy–saving
mode easily
ECO MODE key
Energy-saving mode can be set
easily. Energy-saving mode
consists of “Light Output Mode,”
“With No Input,” “With Static
Signal” and “Standby Mode.”
1 Press the ECO MODE key to
display the ECO Mode menu.
2 Press the / key or ECO MODE
key to select “ECO” or “User”
mode.
ECO:
Sets each mode to the
optimum energy-saving value.
Light Output Mode: Low
With No Input: Standby
With Static Signal: Light
Dimming
Standby Mode: Low
Speaker Setting: Sync with
Power
User:
Sets each item of the ECO
Mode menu as you desire (go
to step 3).
3 Select “User” then press the 
key.
The setting items appear.
4 Press the / key to select the
item then press the ENTER key.
5 Press the / key to select the
setting value.
6 Press the ENTER key.
The screen returns to the User
screen.
For details on each setting, see
“Speaker Setting” in the Function
menu (page 31), “Light Output
Mode,” “Constant Brightness,”
“With No Input,” “With Static
Signal,” and “Standby Mode” in
the Connection/Power menu
(page 34).
Note
If you set “ECO Mode” to “ECO,” or
“Standby Mode”(in “User”) to “Low,”
the network control function will be
disabled in standby mode. If the
external control is being performed
by using the network or network
control function, do not select “ECO,”
or do not set “Standby Mode” ( in
“User”) to “Low.”
 Infrared transmitter
About remote commander
operation
• Direct the remote commander
toward the remote control receiver.
• The shorter the distance between
the remote commander and the
projector is, the wider the angle
within which the remote
RETURN
ECO
User
ECO Mode
:Sel
:Back
RETURN
Light Output Mode Standard
Constant Brightness
Auto Power Saving
Standby Mode
Off
ON
With No Input
Light Dimming
With Static Signal
Standard
User
:S el
:S et
:Back

Sony VPL-PWZ10 Specifications

General

Brand	Sony
Model	VPL-PWZ10
Category	Projector
Language	English