The headset goes into pairing mode.
Unlock the screen of the Android smartphone if it is locked.
4
Search for this headset on the smartphone.
5
Select [Setting] — [Bluetooth].
1.
Touch [
] next to [Bluetooth] to turn on the Bluetooth function.
2.
Touch [WF-SP700N].
If passkey (*) input is required on the display of the smartphone, input “0000.”
The headset and smartphone are paired with each other and connected. You will hear a voice guidance
“BLUETOOTH connected”.
If they are not connected, see “Connecting to a paired Android smartphone .”
If [WF-SP700N] does not appear on the display, try again from step 3.
6
A Passkey may be called “Passcode,” “PIN code,” or “Password.”
*
Remove the right unit from the charging case to turn on the unit.
The connection between the left unit and right unit is established automatically.
7
To Next Page
Loading...
