Help Guide
Wireless Noise Canceling Stereo Headset
WF-SP700N
Pairing cannot be done.
Bring the headset and the Bluetooth device within 1 m from each other.
When you turn on the headset for the first time after purchasing, initializing, or repairing it, the headset enters pairing
mode automatically. When you want to pair a 2nd or subsequent device, press and hold the
button of the
headset for more than 7 seconds to enter pairing mode.
When you pair the headset with devices again after initializing or repairing the headset, information for pairing with
the headset remaining on the iPhone or other device may prevent you from pairing them successfully (iPhone etc.).
In this case, delete the pairing information of the headset from the device, and then pair them again.
Related Topic
About the indicator
How to make a wireless connection to Bluetooth devices
Initializing the headset to restore factory settings
4-730-308-11(4) Copyright 2018 Sony Corporation
To Next Page
Loading...
