Sony XE-744 - Spectrum Analyzer Display Customization; Adjust Spectrum Analyzer Sensitivity

Changing the Spectrum Analyzer Displays
Adjusting the Oscillation Range of the Spectrum Analyzer
Press the SENS button.
The unit enters the spectrum analyzer oscillation adjust mode.
SENS ==
(The “SENS” indication appears on the
adjustment mode display section of the
display window.)
Adjust the level of the oscillation with the +/- button.
(You can adjust the level of the oscillation in seven steps while watching the spectrum
analyzer display section.)
m To increase the sensitivity t
To decrease the sensitivity =
SENS T
(The level indication goes up or down)
Press the SENS button.
(The display returns to that of the spectrum
analyzer display.)
Note
if you do not proceed with the operation described m
steps 1 and 2 within 15 seconds, the spectrum
analvzer oscillation adiust mode will be cancelled.