For details, refer to “ Adjusting images in the auto mode (My Image Style) .”
To select the recording format (
File Format)
The resolution and degree of compatibility vary depending on the recording format (XAVC HS 4K/XAVC S 4K/XAVC S
HD/XAVC S-I 4K/XAVC S-I HD). Select the format in accordance with the purpose of the movie to be shot.
To select the frame rate or image quality (
Movie Settings)
The frame rate determines the smoothness of motion in movies. ([
Movie Settings] → [Rec Frame Rate])
The image quality changes with the bit rate. ([
Movie Settings] → [Record Setting])
If the bit rate is high, the amount of information will increase and you can shoot high-quality movies. However, this will
result in a larger volume of data.
Select the frame rate and bit rate according to your preference and purpose.
To adjust the exposure (
Shoot Mode)
You can select the exposure mode in [
Shoot Mode]. Select the exposure mode through the combination of a shutter
speed and aperture value.
Also, if you enable [Touch AE] under [Touch Func. in Shooting], you can adjust the exposure to the touched area.
To select the focusing method (
Focus Mode/ Focus Area)
Select
(Continuous AF) or (Manual Focus) for [ Focus Mode]. You can specify the focus area by setting
[
Focus Area].
Even during shooting with manual focus, you can temporarily switch to auto focus in the following ways.
Press the custom key to which [AF On] is assigned, or press the shutter button halfway.
Press the custom key to which [Subject Recognition AF] is assigned.
Touch the subject on the monitor. (when [Touch Func. in Shooting] under [Shooting Screen] is set to [Touch Focus] or
[Touch Tracking])
To record movie audio in 4 channels
Attach a genuine Sony accessory that supports 4-channel and 24-bit audio recording to the Multi Interface Shoe of the
camera.
Hint
You can also assign the start/stop movie recording function to a preferred key.
You can focus quickly while shooting movies by pressing the shutter button halfway down. (The sound of auto focus operation
may be recorded in some cases.)
You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
The sounds of the camera and lens in operation may be recorded during movie shooting. To prevent sounds from being
recorded, set [Audio Recording] to [Off].
To prevent the operating sound of the zoom ring from being recorded when a power zoom lens is used, we recommend recording
movies using the zoom lever of the lens. When moving the zoom lever of the lens, be careful not to flip the lever.
When [Auto Power OFF Temp.] is set to [High], the camera can continue movie recording even when the temperature of the
camera becomes high.
Note
An icon indicating that data is being written is displayed after shooting. Do not remove the memory card while the icon is
displayed.
You cannot start recording a movie while writing data. Wait until data writing is completed and “STBY” is displayed before
recording a movie.
If the
(Overheating warning) icon appears, the temperature of the camera has risen. Turn the power off and cool the camera
and wait until the camera is ready to shoot again.
To Next Page
Loading...
