Help Guide
Interchangeable Lens Digital Camera
ZV-E1
Shooting still images (Intelligent Auto)
This section describes how to shoot still images in the [Intelligent Auto] mode. In the [Intelligent Auto] mode, the camera
automatically focuses and automatically determines the exposure based on the shooting conditions.
To shoot with the touch function icons
You can also shoot by touching an icon on the screen instead of pressing the shutter button. Swipe the monitor left or
right to display the touch function icons, and then touch the
(shutter) icon. You can view the captured image by
touching the
(switch to playback screen) icon.
For details on how to display the touch function icons, see “Touch function icons.”
Set the Still/Movie/S&Q switch to
(Still) to select the still image shooting mode.
1
MENU →
(Shooting) → [Shooting Mode] → [ Shoot Mode] → [Intelligent Auto].
The shooting mode will be set to
(Intelligent Auto).
2
Adjust the monitor angle, and hold the camera.
3
When a zoom lens is mounted, enlarge images by using the zoom lever or the zoom ring.
4
Press the shutter button halfway down to focus.
When the image is in focus, a beep sounds and the indicator (
, etc.) lights up.
5
Press the shutter button fully down.
6
To Next Page
Loading...
