5XG 310/330 Rev. 2
Operating Instructions
Executable Actions
Ì Factory reset: All settings are reset to the factory settings. The factory
reset function sets all of the configuration settings and options to their
original state. All data entered after the initial installation will be deleted,
including the HTTP proxy cache, the entire email queue, accounting
and reporting data, passwords, and uninstalled Up2Date packages.
The version of the software will not change. That is, all firmware
and pattern updates that have been installed will be retained.
Ì Shut down: The security appliance is shut down. The shut down action allows
you to turn off the system, and allows you to cleanly stop all running services.
Ì Reboot machine: The security appliance is rebooted. The reboot
action will shut down the system completely and reboot.
Control Key Functions
The current menu is left. When the key is pressed a couple of times, the
modifications are discarded and the initial state will be displayed.
These keys are used to switch between the different menus and/or characters.
Pressing executes the configured action.
Factory Reset
S.NO. Action Item/press What you see on the LCD What it means
1.
SOPHOS
Protection
Appliance is booting
2.
Firmware Version
SFOS 16.05.1 MR-1
Appliance has finished Booting
3.
Main Menu
1. System Menu
Shows Main Menu first item
4.
x2
Main Menu
3. Firmware Menu
Shows Main Menu third item
5.
Firmware Menu
1. Show Firmware
Enters Into Firmware Menu
6.
Firmware Menu
2. Factory Reset
Shows Firmware Menu second item
7.
Factory Reset
1. v to Cont.
Press down key to continue
8.
Factory Reset
2. Confirm?
Asks for Confirmation
9.
Factory Reset under progress
10.
Firmware Version
SFOS 16.05.1 MR-1
Factory Reset complete
To Next Page
Loading...
