INSTRUCTION AND SERVICE PARTS MANUAL - FREEZER CS 800, s/n F0176-00 - ALFRED & CO
D6
- Performing any maintenance or service on the motor(s).
- Removing the front door.
- Disassembling the pump cover or rotors
- Assembling or disassembling the dasher
SCRAPER BLADES
The scraper blades assembled on the dasher must be sharp to work correctly.
This creates a hazard of severe cuts for anyone handling the dasher
assembly or scraper blades incorrectly. Wear protective clothing for the hands
and arms when handling the dasher assembly or the scraper blades. Avoid
contacting the cutting edge of the scraper blades.
DANGER !
All dasher have removable scraper blades. These blades can be very
sharp and cause severe injury if not handled properly.
To minimize the risk of cuts from these blades when removing and
installing the dasher:
• When removing the dasher by hand, always use heavy protective gloves
(such as welders gloves) that reach to the elbows.
• Always work with at least one other trained person when removing or
installing the dasher.
• Remove each blade from the dasher as soon as possible to remove the
danger from others in the immediate area.
• Always store the blades together in a labeled container when not in use.
3.10. THERMIC HAZARDS
DANGER !
During cleaning and sanitizing front door and pumps surfaces can reach
high temperatures (above 65°C) and cause severe burns if touched. To
avoid the risk, during these operations, personnel must keep away from
these parts of the machine (no manual intervention is necessary during
cleaning and sanitizing).
3.11. COMPRESSED AIR HAZARD
The CS Freezer uses compressed air for the following functions:
• Added to the product to produce “overrun”
• Operate the bypass covers on the product pump
To Next Page
Loading...