EasyManua.ls Logo

Söring SONOCA 185 User Manual

Söring SONOCA 185
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
0123
Instructions for use
Ultrasonic Generator
SONOCA 185
Valid from serial number: 94090101
DocNr.: 03-4655 R03.01 | 22.09.2015 | en-US
Ultrasonic Generato r
out.fm Seite 1 Dienstag, 22. September 2015 3:24 15

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Söring SONOCA 185 and is the answer not in the manual?

Söring SONOCA 185 Specifications

General IconGeneral
BrandSöring
ModelSONOCA 185
CategoryMedical Equipment
LanguageEnglish

Summary

Safety

2.1 Intended use

Defines the specific applications and purpose of the ultrasonic generator.

2.2 Selection and qualification of specialist staff

Specifies the required qualifications and training for personnel operating the generator.

2.3 Operating environment

Details the environmental conditions required for safe and proper use of the generator.

2.5 Cable and accessory management

Guidelines for ensuring cables and accessories are in good condition and safe to use.

Installation

5.1 Connecting the ultrasonic generator to the main power supply

Instructions for connecting the generator to the power source, including safety warnings.

5.2 Connecting the foot switch

Procedure for connecting the foot switch to the ultrasonic generator.

5.3 Turning on the ultrasonic generator

Step-by-step guide for powering on the generator and performing the self-test.

5.4 Connecting instruments

General guidelines for connecting instruments and their accessories.

5.4.1 Connecting the instrument cable to the instrument

Procedure for connecting the instrument cable to the instrument, including safety.

5.4.2 Connecting the irrigation tubing to the instrument

Procedure for connecting the irrigation tubing to the instrument, ensuring sterility.

5.5 Connecting irrigation

Steps for installing the irrigation bottle and connecting the tubing.

Operation

6.1 Preparing for treatment

Steps to prepare the generator and ensure it's ready for treatment.

6.1.2 Functional testing

Steps for performing a functional test of the generator and instrument before treatment.

6.2 Starting treatment

Guidelines for handling the instrument and setting ultrasonic power and irrigation flow.

Reprocessing

Preventive maintenance

Technical data

Electromagnetic compatibility

Related product manuals