Technical data
DocNr.: 03-4655 R03.01 | 22.09.2015 | en-US | Ultrasonic Generator 41
10 Technical data
10.1
SONOCA 185
Dimensions: Width: 370 mm, height: 160 mm, depth: 390 mm
Weight: 13.0 kg
Output voltage: 230 V ± 10% 115 V ± 10% 100 V ± 10%
Current consumption: max. 0.6 A max. 1.2 A max. 1.4 A
Power fuse
(2 thermal fuses each):
T1.25AH T2.5AH T3.15AH
Frequency: 50 Hz to 60 Hz ± 5%
Power consumption: Max. 140 VA
Temperature: Operation: 10 °C to 40 °C (50 °F to 104 °F)
Transport and storage: –20 °C to 50 °C (-4 °F to 122 °F))
Relative humidity: Operation: 20% to 80%, non-condensing
Transport and storage: 20% to 85%, non-condensing
Air pressure: Operation: 700 hPa to 1060 hPa (10.2 psi to 15.4 psi)
Transport and storage:
700 hPa to 1060 hPa (10.2 psi to 15.4 psi)
Maximum activation time: Depends on the instrument
No longer than 60 minutes total
Frequency range of oscillator: 20 kHz to 80 kHz
Working frequency: 25 kHz, 35 kHz
Electrical output power: Maximum 60 W
Irrigation flow: Depends on the instrument, maximum 150 ml/min
Classification: Protection class I (in accordance with IEC 60601-1),
Type BF (in accordance with EN 60601-1),
Class IIb (in accordance with German Medical Devices Act and
directive 93/42/EEC, Annex IX),
German Ordinance on the Installation, Operation and Use of
Medical Products (MPBetreibV)
out.fm Seite 41 Dienstag, 22. September 2015 3:24 15
To Next Page
Loading...
