51
CONSUMPTION MATERIALS
BSS-134
CHAP.- 9
- Cut the net/fi lm by hand using a pair of scissors, making a diagonal cut of about 45° (see fi g.4 chap.9).
- activate the manual valve [M] (see fi g.7 chap.9) to open the carrier tracks; drag the mesh manually
and roll it up in the tube. Close the tracks using the manual valve.
In manual start mode, move the tracks that carry the mesh forward until the mesh is entirely rolled
up in the tube.
Close the doors.
Conduct a vertical sealing operation.
Conduct several manual cycles to conduct tests on packages, generating empty bags.
Fig.4 chap.9
Fig.5 chap.9
Fig.6 chap.9
To Next Page
Loading...