MAITENANCE E CLEANING
BSS-134
CHAP.- 10
Cleaning
check the cleaning state of the elements.
Handling
check, by handling, the functioning of the components (e.g.: friction test).
It is compulsory to wear protection gloves when carrying out the
handling operations.
Lubrication
check the lubrication state of the components.
It is compulsory to wear protection gloves when carrying out the
lubrication operations.
10.3 Check
During daily operations, the different mechanical parts of the machine must be regularly checked.
10.4 Lubrication
Particular attention must be taken during lubrication. Ensure there is suffi cient lubricant on all
mechanical parts in motion. Lubricate at regular intervals.
10.5 Cleaning
The dirt, sand residues, etc., can accumulate and cause damages.
We recommend to frequently clean the entire machine. Use compressed air or a dry clean cloth.
10.6 Mechanical inspections
Below are the tables and indications on the points of inspection and prescribed checks for each
machine part.
To Next Page